220v Wall Touch 2835 LED Strip Light Wifi Bluetooth 23key Remote Control Dimmer Kit Adhesive Tape Diode 120LEDs/m Home Decor

Features:

-2835 light strip is equipped with 1 power plug, adhesive on the back, No fixing clip.

-If you need UK/UA/AU Plug light strips, please contact our customer service and we will note the correct specifications for order delivery.

Specifications：

Material: Silicone+LED

Control type: Wifi APP/ Bluetooth APP/ 23Keys IR / Wall Touch RF remote control

Input voltage: AC220 -240V(EU Plug)

LED type: 2835 LED

Material: Clear Tube

LED: 120leds/m

Waterproof rate: Waterproof IP65, can be used indoors / outdoors.

Light Size: 10 * 4mm

Light Color: Cold white(6000-6500k), warm white(3000-3500k), natural white(4000-4500k)

23keys IR remote powered by: 2*AAA Batteries (not included)

RF remote distance: about 10-20m

RA (CRI): >90

Operation temperature: -20℃-+60℃

Storage temperature: -20℃-+60℃

Dimmable: YES

Life Span: > 50000 hours

Cut size：10cm

Applications:

Widely applied against light for traffic sign letters.

Applicable for car decoration, outline lighting or edge lighting.

Illuminates varied domestic life, diy lights for corridors, stairs, paths, Windows.

It illuminates the use of colorful decorations for hotels, theaters, clubs, shopping malls, festivals and shows.

For specific steps, if you still don’t understand the following steps, you can chat with us privately and we will send you an English version of the instruction manual.

23key Remote Kit:

1. Insert the light strip plug into the output socket of the controller. The positive and negative poles of the controller and the light strip should correspond. Pay attention to check whether there is a short circuit at the pin position of the light strip. If there is a short circuit, please fix it before powering on, otherwise the controller and the light strip will be damaged. Light strip.

2． The power plug is energized and the remote control is used to control the controller to work as required.

3. When installing the controller, install the remote control receiving tube in a location without obstacles to avoid remote control failure.

Bluetooth 23key Remote Kit:

1. Scan the product QR code to download and install the APP. APP name: Trick Light. Applicable mobile operating system: IOS version 6.0 or above or Android version 4.3 or above. Software language: English, Chinese. The language is automatically recognized according to the mobile phone operating system.

2． Open the Trick Light APP on your mobile phone and connect the light strip to the dimmer (the positive and negative poles of the controller and the light strip must correspond. Pay attention to check whether there is a short circuit at the light strip position. If there is a short circuit, please deal with it before powering on, otherwise the controller will be damaged. and light strip), when the power plug is powered on, the software will automatically scan for Bluetooth devices and automatically connect to the device. Use the APP or remote control to control the controller to work as needed.

3. When installing the infrared controller, install it in a location without obstacles to avoid remote control failure; RF wireless radio frequency remote control can remotely control objects.

Wifi 23key Remote Kit

1. Scan the product QR code to download the APP and register an account.

2. Connect the controller and LED light strip and turn on the power.

3. Open the Tuya Smart APP on your mobile phone and click to add a device. (Reset the device, turn the power on and off 3 times, on-off-on-off-on, and enter the flash state to configure the network. Please complete the network configuration operation within three minutes.) Select Lighting→Light Strip→Confirm that the indicator light is flashing quickly. Enter the WIFI account and password → Confirm → The connection is added successfully → Click Finish to complete product matching.

4. Enter the five parts of the APP main interface: power on/off, white light brightness adjustment interface, scene, plan, and settings.

①Enter the white light color ring interface to adjust the light brightness.

②Enter the scene interface to freely choose different scenes, and the scenes can be edited and set. For example, the lighting mode can be set to static, jump, breathing, etc. The changing speed is adjustable and the scene can be named freely.

③ Enter the planning interface (you can select the timing type, fall asleep and wake up)

④ Enter the setting interface to perform timing (turn off the lights, turn on the lights, turn on the lights and dimming, turn on the lights and set the scene), countdown (delay to turn off the lights), and power-on response.

5. It can be controlled through smartphone APP and intelligent voice control, and can also be controlled with an infrared 23-key remote control. The single-button control of 8 dynamic modes is simple and clear, and has power-off memory, which is convenient and practical and avoids repeated settings.

Wall Touch Remote Kit:

-The new high-end RF wireless 86 panel touch high-voltage monochromatic dimmer has the advantages of convenient wiring and simple use; it can realize jump, gradient, flash and other light changing effects according to the actual needs of customers.

-Coding (one-to-one control): Within 5 seconds after the controller is powered on, press and hold the night light button, and the light will flash slowly 3 times.

-Code clearing (one-to-many control): Within 5 seconds after the controller is powered on, press and hold the 100% brightness button, and the light will flash 3 times.

-Notice

This product uses high-voltage 110V/220V dangerous voltage. Do not open the casing to prevent electric shock.

Package include:

-Wifi 23key Remote Kit：

1 x 2835 LED light strip

1 x 23key IR remote control

1 x 750W WIFI controller with EU power plug

-Bluetooth 23key Remote Kit:

1 x 2835 LED light strip

1 x 23key IR remote control

1 x 750W Bluetooth controller with EU power plug

-Wall Touch Remote Kit:

1 x 2835 LED light strip

1 x Wall Touch RF remote control

1 x 750W led controller with EU power plug

-23key Remote Kit:

1 x 2835 LED light strip

1 x 23key IR remote control

1 x 750W led controller with EU power plug

Tips:

-This Is High Voltage AC220V~240V Strip, Please Do Not Live To Cut .Please disconnect the power supply before cutting the strip .

Otherwise will cause serious safety accidents !

-When you light up the strips , be sure to spread them out ,the led strips cannot be rolled together ,Otherwise if you turn it on for a long time, it’s going to be hot. the light strip will be damaged ,Even will cause serious safety accidents !

Note:

-When placing an order, please pay attention to purchasing the style of light strip you need. If you purchase the wrong style, please contact us within 8 hours and we will change it for you in time, otherwise we cannot change it.

-"Aliexpress Selection Premium shipping" We cannot change the address and other information due to this logistics problem. Please make sure the information is correct when placing an order.

There are 4 styles for you to choose from. If you have difficulty choosing, you can privately chat with our customer service to answer your questions about the style that is most suitable for you.

-IR 750W DIMMER

-RF 750W DIMMER

-Bluetooth

-Wi FiLIGHT UP THE WHOLE ROOM

-BEDROOM

-LIVING ROOM

-TOILET

-KITCHEN

-etc.BRIGHTER THAN ORDINARY LIGHT STRIPS

-220V 2835 led Light, soft and flexible, equipped with ouch panel FR 750W dimmer.Suitable for indoor and outdoor decoration, the double-sided adhesive on the back can be firmly fixed.WARM LIGHT 3OOOK

NATURAL LIGHT 4000K

WHITE LIGHT 6OOOKWall touch type

-Long press to adjust brightnessEASY INSTALLATION

-Double-sided tape desian on the back, no need for power plug, easy and quick installation, suitable for use in various scenarios.Wall touch type

-Long press to adjust brightnessBluetooth and wifi models

-Requires mobile app to operateBluetooth and wifi models

-Requires mobile app to operateRICH FEATURES

-Set more brightness and modes via app