4 Sets Load Resistor for LED Lights 25W 50W Aluminum Shell Power Resistors 6ohm 8ohm 10ohm, for 12V Car Turn Signal Lamp Flash
This resistor is only suitable for 12V models, not for 24V trucks.
Usually a lamp needs a resistor
LED car tail light aluminum shell resistance:
1. High power and small volume.
2. Extremely high accuracy and high voltage resistance.
3. Strong stability, sturdy and durable.
4. Good quality, beautiful appearance.
5. Waterproof and excellent heat dissipation.
Generally used in LED car taillights, frequency converters, car braking equipment, and industrial control equipment on large power supplies. The LED car aluminum housing resistor is used to adjust the flashing speed of LED lights
Description:
1.After changing the installation of LED lights, the car’s trip computer will show that there is a problem with the newly installed LED lights, etc.
2.In order to solve this problem, the installation of this product can solve the phenomenon of false alarms due to the installation of LED lights in the driving computer car.
3.When using a resistor to solve the stroboscopic, all the turn signals (the small side lights do not need to install a resistor) change the LED turn lights, you must install a resistor.
4.It is recommended to use 25W for small lamps with low current demand such as turn signals, reversing lights, rear fog lights, indicator lights, daytime running lights
5.It is recommended to use 50W for brake lights, front fog lights (change to surround), and other light bulbs with large current requirementsInstallation is easy! Put the wire into the button hole of the wire clip, press the button, and then fix the resistor body and it’s OK. It’s that simple! Can solve the problem of false alarms, false alarms, and stroboscopic (connect resistors in parallel to the positive and negative poles of the alarm stroboscopic bulb)
Package List :
4 resistors+8 clips = 4 set
Common problem:
Question 1: What car model can this decoder be suitable for?
Answer: This decoder is suitable for 12V sedans, business vehicles, or off-road vehicles, such as Volkswagen, BMW, Mercedes Benz, Skoda, and other sedans with on-board computers, but not suitable for 24V trucks.
Question 2: Which bulb position can this decoder be installed in?
Answer: This universal decoder can be installed on the circuit of reversing lamp, brake lamp, front fog lamp, rear fog lamp, turn signal lamp, etc.
Question 3: What is the working principle of this decoder?
Answer: The working principle of the decoder is to increase the working power in the circuit, simulate the power of the original car circuit, and achieve the purpose of detecting through the driving computer circuit.
Question 4: Does this decoder generate a lot of heat?
Answer: Decoder heating is a normal phenomenon and will not affect its normal operation. A normal light bulb also generates a lot of heat, but it is not normal if it does not generate heat.
Question 5: What else should I pay attention to when installing this decoder?
Answer: Please fix the decoder on an iron frame or other metal parts suitable for heat dissipation, and it can also be suspended and fixed. Please do not allow the decoder to come into direct contact with the wires inside the car because the metal shell dissipates heat quickly and may melt the plastic on the outer layer of the wires.
Reviews
There are no reviews yet.